Power Line Carrier Communication Using Automated Meter Reading

R. Gunasekaran; C. Karthikeyan; J. Pavalam; P. Mohanapriya; A. Preethi; V. Indhumathi

doi:doi:10.11648/j.be.20170104.12

| Peer-Reviewed

Power Line Carrier Communication Using Automated Meter Reading

R. Gunasekaran, C. Karthikeyan, J. Pavalam, P. Mohanapriya, A. Preethi, V. Indhumathi

Published in Bioprocess Engineering (Volume 1, Issue 4)

Received: 5 April 2017 Accepted: 10 May 2017 Published: 18 August 2017

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

A new concept of Power line Communication. Now human operators do the Meter reading for the consumption of Electricity from house to house and building to building. It requires huge number of labor and takes more time to complete the process. Reading error is a common cause of human operator. Automatic Meter Reading (AMR) becomes an executable option to overcome the problems of huge time taking to get the meter readings, the measured values are in kilo watt-hours (kWh) by energy meter. The supply status of the consumer reading unit we identified the disk rotation of the energy meter. The main advantage of this system is a low cost system that produces very encouraging results and it can be implemented upon existing electro-mechanical meters so there is no need to purchasing new meters AMR is the remote collection of consumption data from customer’s utility meters over power line. Power-Line Communication (PLC) carries data on a conductor that is also used simultaneously for AC electric power distribution to consumers. PLC transmitter is responsible for transmission of data from the provider end. At the provider end, there will be the PLC receiver, which is responsible for data receiving, and this module makes an interface with computer, which is responsible for data processing.

Published in	Bioprocess Engineering (Volume 1, Issue 4)
DOI	10.11648/j.be.20170104.12
Page(s)	104-109
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2017. Published by Science Publishing Group

Keywords

AMR, Carrier Communication, PLC, Power Line

References

[1]	Amit Jain “A Prepaid Meter Using Mobile Communication” vol3, 2011.
[2]	Ashna. K, “GSM Based Automatic Energy Meter Reading system with Instant Billing”, 2013.
[3]	Arun, S “Design And Implementation Of Automatic Meter Reading System Using GSM, ZIGBEE through GPRS”, Vol. no. 2, May2012.
[4]	Bharat Kulkarni, “GSM based automatic meter reading system using ARM controller”, Volume2, Issue5, Feb 2005.
[5]	Chunjuanwei, “Implementation Of Automatic Meter Reading System Using PLC and GPRS”, 2011.
[6]	Elena M, “Power line Communication In Home-Building Automation System”, 2004.
[7]	Harish P., “GSM Based Automatic Wireless Energy Meter Reading System”, Vol. 1, Issue 9, November – 2012.
[8]	Moghavvemi. M, “A Reliable and Economically Feasible Automatic Meter Reading System Using Power Line Distribution Network”, Jun 2013.
[9]	Mejbaul Haque, “Microcontroller Based Single Phase Digital Prepaid Energy Meter for Improved Metering and Billing System”, ‎2011.
[10]	Sravanthi. T. “Prepaid Electricity Billing System Using GSM Mobile”, vol. 2, issue 2, Feb 2013.
[11]	Vivekbhashkar, “A Reliable Automatic Meter Reading System Using Power Line Distribution Network”, issue 3, Vol. No. 1, 2012.

Cite This Article

Plain Text BibTeX RIS

APA Style

R. Gunasekaran, C. Karthikeyan, J. Pavalam, P. Mohanapriya, A. Preethi, et al. (2017). Power Line Carrier Communication Using Automated Meter Reading. Bioprocess Engineering, 1(4), 104-109. https://doi.org/10.11648/j.be.20170104.12

Copy | Download

ACS Style

R. Gunasekaran; C. Karthikeyan; J. Pavalam; P. Mohanapriya; A. Preethi, et al. Power Line Carrier Communication Using Automated Meter Reading. Bioprocess Eng. 2017, 1(4), 104-109. doi: 10.11648/j.be.20170104.12

Copy | Download

AMA Style

R. Gunasekaran, C. Karthikeyan, J. Pavalam, P. Mohanapriya, A. Preethi, et al. Power Line Carrier Communication Using Automated Meter Reading. Bioprocess Eng. 2017;1(4):104-109. doi: 10.11648/j.be.20170104.12

Copy | Download

@article{10.11648/j.be.20170104.12,
  author = {R. Gunasekaran and C. Karthikeyan and J. Pavalam and P. Mohanapriya and A. Preethi and V. Indhumathi},
  title = {Power Line Carrier Communication Using Automated Meter Reading},
  journal = {Bioprocess Engineering},
  volume = {1},
  number = {4},
  pages = {104-109},
  doi = {10.11648/j.be.20170104.12},
  url = {https://doi.org/10.11648/j.be.20170104.12},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.be.20170104.12},
  abstract = {A new concept of Power line Communication. Now human operators do the Meter reading for the consumption of Electricity from house to house and building to building. It requires huge number of labor and takes more time to complete the process. Reading error is a common cause of human operator. Automatic Meter Reading (AMR) becomes an executable option to overcome the problems of huge time taking to get the meter readings, the measured values are in kilo watt-hours (kWh) by energy meter. The supply status of the consumer reading unit we identified the disk rotation of the energy meter. The main advantage of this system is a low cost system that produces very encouraging results and it can be implemented upon existing electro-mechanical meters so there is no need to purchasing new meters AMR is the remote collection of consumption data from customer’s utility meters over power line. Power-Line Communication (PLC) carries data on a conductor that is also used simultaneously for AC electric power  distribution to consumers. PLC transmitter is responsible for transmission of data from the provider end. At the provider end, there will be the PLC receiver, which is responsible for data receiving, and this module makes an interface with computer, which is responsible for data processing.},
 year = {2017}
}

Copy | Download

TY  - JOUR
T1  - Power Line Carrier Communication Using Automated Meter Reading
AU  - R. Gunasekaran
AU  - C. Karthikeyan
AU  - J. Pavalam
AU  - P. Mohanapriya
AU  - A. Preethi
AU  - V. Indhumathi
Y1  - 2017/08/18
PY  - 2017
N1  - https://doi.org/10.11648/j.be.20170104.12
DO  - 10.11648/j.be.20170104.12
T2  - Bioprocess Engineering
JF  - Bioprocess Engineering
JO  - Bioprocess Engineering
SP  - 104
EP  - 109
PB  - Science Publishing Group
SN  - 2578-8701
UR  - https://doi.org/10.11648/j.be.20170104.12
AB  - A new concept of Power line Communication. Now human operators do the Meter reading for the consumption of Electricity from house to house and building to building. It requires huge number of labor and takes more time to complete the process. Reading error is a common cause of human operator. Automatic Meter Reading (AMR) becomes an executable option to overcome the problems of huge time taking to get the meter readings, the measured values are in kilo watt-hours (kWh) by energy meter. The supply status of the consumer reading unit we identified the disk rotation of the energy meter. The main advantage of this system is a low cost system that produces very encouraging results and it can be implemented upon existing electro-mechanical meters so there is no need to purchasing new meters AMR is the remote collection of consumption data from customer’s utility meters over power line. Power-Line Communication (PLC) carries data on a conductor that is also used simultaneously for AC electric power  distribution to consumers. PLC transmitter is responsible for transmission of data from the provider end. At the provider end, there will be the PLC receiver, which is responsible for data receiving, and this module makes an interface with computer, which is responsible for data processing.
VL  - 1
IS  - 4
ER  -

Copy | Download

Author Information

R. Gunasekaran

Excel College of Engineering and Technology, Namakkal (Dist.), Tamil Nadu, India
C. Karthikeyan

K. S. Rangasamy College of Engineering, KSR Kalvi Nagar, Namakka (Dist.), Tamil Nadu, India
J. Pavalam

Excel College of Engineering and Technology, Namakkal (Dist.), Tamil Nadu, India
P. Mohanapriya

Excel College of Engineering and Technology, Namakkal (Dist.), Tamil Nadu, India
A. Preethi

Vivekanandha College of Engineering for Women-Autonomous, Namakkal (Dist.), Tamil Nadu, India
V. Indhumathi

K. S. Rangasamy College of Engineering, KSR Kalvi Nagar, Namakka (Dist.), Tamil Nadu, India

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

R. Gunasekaran, C. Karthikeyan, J. Pavalam, P. Mohanapriya, A. Preethi, et al. (2017). Power Line Carrier Communication Using Automated Meter Reading. Bioprocess Engineering, 1(4), 104-109. https://doi.org/10.11648/j.be.20170104.12

Copy | Download

ACS Style

R. Gunasekaran; C. Karthikeyan; J. Pavalam; P. Mohanapriya; A. Preethi, et al. Power Line Carrier Communication Using Automated Meter Reading. Bioprocess Eng. 2017, 1(4), 104-109. doi: 10.11648/j.be.20170104.12

Copy | Download

AMA Style

R. Gunasekaran, C. Karthikeyan, J. Pavalam, P. Mohanapriya, A. Preethi, et al. Power Line Carrier Communication Using Automated Meter Reading. Bioprocess Eng. 2017;1(4):104-109. doi: 10.11648/j.be.20170104.12

Copy | Download

@article{10.11648/j.be.20170104.12,
  author = {R. Gunasekaran and C. Karthikeyan and J. Pavalam and P. Mohanapriya and A. Preethi and V. Indhumathi},
  title = {Power Line Carrier Communication Using Automated Meter Reading},
  journal = {Bioprocess Engineering},
  volume = {1},
  number = {4},
  pages = {104-109},
  doi = {10.11648/j.be.20170104.12},
  url = {https://doi.org/10.11648/j.be.20170104.12},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.be.20170104.12},
  abstract = {A new concept of Power line Communication. Now human operators do the Meter reading for the consumption of Electricity from house to house and building to building. It requires huge number of labor and takes more time to complete the process. Reading error is a common cause of human operator. Automatic Meter Reading (AMR) becomes an executable option to overcome the problems of huge time taking to get the meter readings, the measured values are in kilo watt-hours (kWh) by energy meter. The supply status of the consumer reading unit we identified the disk rotation of the energy meter. The main advantage of this system is a low cost system that produces very encouraging results and it can be implemented upon existing electro-mechanical meters so there is no need to purchasing new meters AMR is the remote collection of consumption data from customer’s utility meters over power line. Power-Line Communication (PLC) carries data on a conductor that is also used simultaneously for AC electric power  distribution to consumers. PLC transmitter is responsible for transmission of data from the provider end. At the provider end, there will be the PLC receiver, which is responsible for data receiving, and this module makes an interface with computer, which is responsible for data processing.},
 year = {2017}
}

Copy | Download

TY  - JOUR
T1  - Power Line Carrier Communication Using Automated Meter Reading
AU  - R. Gunasekaran
AU  - C. Karthikeyan
AU  - J. Pavalam
AU  - P. Mohanapriya
AU  - A. Preethi
AU  - V. Indhumathi
Y1  - 2017/08/18
PY  - 2017
N1  - https://doi.org/10.11648/j.be.20170104.12
DO  - 10.11648/j.be.20170104.12
T2  - Bioprocess Engineering
JF  - Bioprocess Engineering
JO  - Bioprocess Engineering
SP  - 104
EP  - 109
PB  - Science Publishing Group
SN  - 2578-8701
UR  - https://doi.org/10.11648/j.be.20170104.12
AB  - A new concept of Power line Communication. Now human operators do the Meter reading for the consumption of Electricity from house to house and building to building. It requires huge number of labor and takes more time to complete the process. Reading error is a common cause of human operator. Automatic Meter Reading (AMR) becomes an executable option to overcome the problems of huge time taking to get the meter readings, the measured values are in kilo watt-hours (kWh) by energy meter. The supply status of the consumer reading unit we identified the disk rotation of the energy meter. The main advantage of this system is a low cost system that produces very encouraging results and it can be implemented upon existing electro-mechanical meters so there is no need to purchasing new meters AMR is the remote collection of consumption data from customer’s utility meters over power line. Power-Line Communication (PLC) carries data on a conductor that is also used simultaneously for AC electric power  distribution to consumers. PLC transmitter is responsible for transmission of data from the provider end. At the provider end, there will be the PLC receiver, which is responsible for data receiving, and this module makes an interface with computer, which is responsible for data processing.
VL  - 1
IS  - 4
ER  -

Copy | Download